Replace tire, or patch?

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by Brandon Whitmore, May 20, 2010.

  1. Brandon Whitmore Husqvarna
    B Class

    Location:
    Oregon
    I got a pinch flat in my front tube last weekend, so I replaced the tube and set the bead.

    I then noticed a bulbous looking piece of rubber sticking out of the tire; it was the tube. Turns out I have about a half inch gash in the tire.

    Question:

    Do I just replace the newish tire, or is it accepatacle and ully functional to just patch the interior of the tire?

    PS: The gash is in between the treads.
  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Too dangerous to run a tire with structural damage. At the very least, you'll soon get another punctured tube, at the worst, the tire will come apart.
  3. Brandon Whitmore Husqvarna
    B Class

    Location:
    Oregon
    Thanks Dirtdame,

    Too bad, it's a newer S12.
    Oh well, I'll help keep Kelly in bidness.
  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I will not run those tires for that very reason. I seem to tear them up EZ. split side walls and flat those more than any tire i have owned.
  5. Brandon Whitmore Husqvarna
    B Class

    Location:
    Oregon
    Funny,

    I just found an earlier post from you stating the same thing.
    I put in an e- mail/ order to you for a front X-Circuit.
    I'm not sure if I can call in with a card, or do the PayPal thing -- let me know.

    Thanks.
  6. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    working on it, thanks.

    K