1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Replacement pipe for WR300?

Discussion in '2 Stroke' started by ScottyR, Apr 21, 2009.

  1. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    Has anyone tried an FMF Gnarly or PC pipe from a WR250 on their WR300? I see Kearney is running a Pro Circuit but no one seems to be able to answer if it is a 250 pipe or a one off 300 pipe.

    The WR250 FMF Gnarly pipe looks to have a lot more volume in the expansion chamber area than the stock 300 pipe does which in my opinion is better than the other way around.

    I know I am going to wad the pipe one of these days on my 300 and I want to have a replacement ready to go.

    Thanks
    Scotty
    ScottyR, Apr 21, 2009
    #1

  2. BSE340 Husqvarna
    B Class

    Location:
    illinois
    I have a fmf gnarly pipe on my 300exc katoom and kx250 and what a huge difference,im not puttin down pc pipes but i had several, one was on the 3000exc, and the fmf seems to hold up better over time. 4 stroke like bottom end with the gnarly for sure, you wont be dissapointed. the dynoport pipes are very good too, but im not sure if their still in buisness or not or what availability is from them. wish they had em for my 82xc250.
    BSE340, Apr 23, 2009
    #2