1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Replacing water pump seal on 07 WR-250

Discussion in '2 Stroke' started by tree dodger, May 22, 2010.

  1. tree dodger Husqvarna
    AA Class

    I believe the impeller is reverse threads. If so, do I turn the impeller clockwise to remove it. To replace the seal and o-ring, do I have to remove the side case and pull out the shaft. If the case does have to come off, is it better to pull the impeller first so the shaft doesn't turn.
    tree dodger, May 22, 2010
    #1

  2. franhoser Husqvarna
    A Class

    Location:
    Maple Ridge, BC
    did you get an answer to this? if so I wouldn't mind some advise as I belive my water pump seal also failed.
    thanks
    franhoser, May 31, 2011
    #2