Not sure if it's been covered but I got my Duallys in the other day and was pretty sure they were going on my SW Motech crash bars- but after realizing my cool new lights would be trashed the first time it goes down I had different ideas. Fabbed some mounts off of the top clamp on the fork- added bonus is that the light goes where the bars are pointed! Not wired up yet, but the left side is a 10 degree spot and the right is a 20 degree flood. It was a really easy project and they are super strong.
I will – but it will be a few days before I'm back at my shop. It really comes down to a simple L bracket… The ones I used just happen to be one eighth inch thick nickel plated steel (spare parts of a machine I had laying around – just needed a little time in the mill to modify)
The mounting- as you can see- I'm only using one bolt so we'll see if I need to do anything additional to keep them from moving. I've got plenty of room to pin them in place... Would have done both clamp bolts but seeing as I milled them from some scrap I had around that wasn't possible.
