1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Roadrace footpegs

Discussion in '4 Stroke' started by exit90a, Apr 15, 2009.

  1. exit90a Husqvarna
    AA Class

    Location:
    KY
    Are there any sportbike foot pegs (GSXR, CBR, ZXR, YZRF)which interchange with the 08 SM510R. The big, grippy dirt pegs don't do it for me. Something like these here.

    Attached Files:

    exit90a, Apr 15, 2009
    #1

  2. exit90a Husqvarna
    AA Class

    Location:
    KY
    Doesn't seem to be much interest in this conversion, but I found some that fit and thought I would put it up for future reference. Pegs are from a 2003 CBR600RR, they are the rear passenger pegs. You will need grade 8 bolts, the stainless steel type bend. Uses stock Husky springs with a little grinding for clearance.

    Attached Files:

    exit90a, Apr 29, 2009
    #2

  3. WoodsChick Administrator

    Location:
    Oakland, CA Miramonte, CA
    Husqvarna Motorcycle:
    3 Terras, 2 `07 SM610s, `09 WB165,
    Other Motorcycles:
    KTM, GasGas, Suzuki, Honda
    Those look pretty good! I've got a few CBR pegs in my basement so it's nice to know I've got some spares should I destroy my SM610 pegs.

    I'm not all that crazy about the stock 610 pegs, whether I'm on the street or dirt. I got some PivotPegz on my KTm 450 and they absolutely rock! I've got a mangled up ankle with lots of metal in it and they are fantabulous as far as extending my limited range of motion. I want them on the 610. Ironically enough, they are gnarly sharp dirt pegs and I was trying to figure out a way to put them on my streetbike, since I wear Tech 6's on my daily commute :lol:

    Different strokes for different folks, I guess:) Thanks for posting up the photos:thumbsup:



    WoodsChick
    WoodsChick, Apr 29, 2009
    #3