125-200cc Seat Concepts Seat for WR 125

Having read the good reviews on this site, I'm looking to get a Seat Concepts seat for my 2012 WR 125.

I can't see the 125 listed on the Seat Concepts site though. So my question is, if I order the seat for the TE 250/310, will it fit?

http://seatconcepts.com/products#!/~/product/category=1671357&id=7268063

I have had 2 seats done by them, very comfortable indeed. I would either send my seat pan in to them and just have them do a custom seat or call them to verify before I ordered the 250 kit. It will come back perfect if you have them do it rather than using a kit that "May" not fit ideal. Their turn around time is pretty quick as well. Made my 310 an all day rider. Thinking about sending them my Berg seat as well.

Kelly's seat on is 165 is simply amazing...

Wow, sounds like these seats are the way forward. My butt can't wait.

Thanks for the responses everybody

I've got one that they put together on my WR and it is very comfortable. My 55 year old butt could not go back to a stock seat. Highly recommended!

I think their listings are for seat kits, foam and or covers.

Call or email Bryon/BMP, if the TE is the same as your newer WR.

If not, you may just have to send your seat to them for a custom job, or try yourself to get the TE foam/cover to work

I have an older WR, so for sure I had to send mine in

I pulled the trigger on the new Seat Concepts seat. After an initial 45 minute ride this evening I would say that this is looking like a must-have aftermarket purchase. My butt loves this seat!

A check of the Husky parts catalogues revealed that my 2012 WR125/144 has an identical seat to the 2008 and later TE 250/310, so I placed an order for the foam and cover for that bike.

This is the first custom seat I've had so don't really have anything to compare it to except the OEM seat, which as we all know isn't the most comfortable for long rides.

A few installation pics:

Seat Concepts foam in the foreground




With cover installed and ready for mounting on the bike



Mounted on the bike (yes my bike lives in my apartment)






Thank you everyone for the advice

How much did that set you back?

$160, which is good value compared to some of the other aftermarket seats available.

Also, Seat Concepts is a CH site sponsor and so you can get a 10% discount on their standard pricing.

Another happy Seat Concepts customer. I have 2 seats done by them, my 310 and the 610. Both are light years above the stocker!

Is it any lower than stock?

Can they do one for a 2011 TM?

I ordered their standard seat, and its maybe a centimetre or two lower than the stock one.

My guess is this could be deliberate. The Seat Concepts seat is wider than the stocker (particularly in the middle and at the back), splaying your legs a little which makes it harder to reach the ground.

I've got one on my WR250. All I can say is aaahhhh.

http://www.seatconcepts.com/products#!/~/category/id=1900298&offset=0&sort=normal

Don't see em listed on their site but try giving them a call, they may be able to help and their customer service is great.

Thanks we will give them a call. The seat on the TM is a 2x6 board painted black .