Sensor help for Motard wheel.

Discussion in 'Super Moto' started by ducatijohn, Sep 19, 2014.

  1. ducatijohn Husqvarna
    A Class

    Location:
    Cary, NC
    Husqvarna Motorcycle:
    2014 TE310, 72 CR250
    Other Motorcycles:
    76 BMW R90S, 99 Kaw ZRX1100, 78 Duc
    I mounted a set of Supermotard wheels on my Te310 but the speedo doesn't work. I need to install a magnet on the rotor carrier to make the sensor work. Does anyone have a good suggestion on the best way to do this? Thanks to all for the great tips.
    ducatijohn, Sep 19, 2014
    #1

  2. Teambowles Husqvarna
    Pro Class

    Location:
    NorCal
    Husqvarna Motorcycle:
    19 FE501
    Other Motorcycles:
    19 ktm 6 days excf 450 n excf 500
    JB weld a small magnet to the front rotor where it aligns to the sensor. After you JB weld it on let it sit over night
    Teambowles, Sep 24, 2014
    #2