I am about to do my service on my 07 TE 450. I remember robertaccio had a really good write up on doing his te. Do you happen to have that write up available here? I thought I remembered you having to lift the subframe....is this neccessary? If anybody else has a good write up that would be great. TIA
Anybody? Coffee....is there any way to locate that thread on TT and post it here it would be a great help! TIA
That would be a huge no no. Definitely not a cool thing to do that is considered 'stealing content'. Anyone that has posted something on TT can post the same info here. Copying someone else's posts and pasting it on CH is not cool though - at least I'm not doing that and I'm not encouraging it. If it means anything I've kept a window open with this thread opened up so I would remember to get back to it... hang on...
Rear suspension maintenance on a 2006 TE250 Remove brake from swing arm, note one is a sheet metal screw and another is a bolt Support brake Remove brake pedal Remove cover, kickstand, and roller from left side Pic says it all Glad I did the suspension that bolt was a bit dry All clean, bolt on left needs washer (not shown). There is a bushing with shoulder in swing arm, then washer, then nut all under the plastic covers These grease fittings are nice but not complete - I would not rely on the grease fittings greasing everything. Also the file "2006-DOHC-Husky-parts.pdf" is different than what this TE250 had. Here is a nice feature: .
Thanks Dean!! I didn't want to copy that info and post it here....I thought maybe I could get Roberts or your attention to post his write up here since it was pretty thorough.
