Service Manual

Hi folks,
Proud new owner of a 2008 TE-610. I wowuld like to get a factory service manual for the bike and would like opinions.

1. Are they available?
2. Are they informative?
3. Where is the bast place to get one. Dealer or other source?
4. Is there anything available that is better than a factory manual?

Thanks a bunch!

Hall's cycles IL. 10.00 on DVD

I got mine from Hall's too. I printed it out double-sided and put it in a binder with section dividers. Makes it a lot easier when you need to look something up. The only drawback is that the manual is in several languages and isn't divided up by language like the owner's manual.

Ordered.

Thanks for the pointer.

I'd pay another $10 (have the CD from Hall's) just to get an English-only version!

Couldn't find it in their online Catalog, did you guys have to call them?

Thanks,

Yes.

3801 N. Dirksen Parkway
Springfield, IL 62707
(217)789-0107 (217)789-7408 Fax
halls@halls-cycles.com
Hours: Tues, Fri 9-7
Wed, Thurs 9-6
Sat. 9-5 Closed Sun, Mon

Yep, I called them. $10 plus shipping.

Yah I wish it was english only, and written in english terms also. Something lost in the translation. So, I read english, the wife reads the German and we can talk to each other about what in the heck are they talking about.

There's a English version posted for free on thumper talk.

Edit: Here it is:http://www.thumpertalk.com/forum/showpost.php?p=8982508&postcount=52

Thanks MotoSteve, that will help me get "get to know" the 2006 sm610 that I don't have just yet. Cobweb will still need the current version to cover the fuel injection stuff. If I had an '08 I'd get the english version anyway, just to not have to wade through 5 languages for most work.

I found a site last night to download the "Workshop Manual" for my 07 TE 510. Here is the link.
http://www.motorcyclemanuals.info/

Cost me right at $10 USD, they sent me a link and I downloaded it this morning. It's in PDF format, and over 700 pages.

Here is a list of what they have for downloading.

HUSQVARNA
SM 610, TE 610, '06 (ITA-ENG-F-D-E)
SMR 630 '04 (ITA-ENG-D-F-E)
SMR 630 (ITA-ENG-D-F-E)
TE 250-450-510,TC 250-450-510,SMR 400-450-510 '06
TE 350-410, TE-TC 610 '95 (ITA-ENG-F-D-E)
TE 410-610 E, SM 610 '98-'00 (ITA-ENG-F-D-E)
TE,TC 250-400 SM450R SM400R '04 (ITA-ENG-D-F-E)
TE,TC 250-450-510 SM400-450510R SMR450R '07 (ITA-ENG-D-F-E)
TE-SMR 570 '03 (ITA-ENG-F-D-E)
TE510 '04 (ITA-ENG-D-F-E)
TE_TC 250-450-510_SM 450-510 R-E3 '07 (ITA-ENG-F-D-E)
WR,CR-250 WR-360 '02 (ITA-ENG-D-F-E)
WRE 125-SM 125S '06 (ITA-ENG-F-D-E)

Free manuals!!

Someone posted this up on ADVrider:

http://www.husqvarnaoutlet.com/repair_manuals

There are a ton of free manuals including the EFI TE/SM610.

Awesome link! Snagged a 510 manual. Now can you find a KTM manual site?

I'll keep my eyes open. I'm looking for a service manual for my '06 KTM 950sm.

Wow, exact manual I paid for. It doesn't get any better than free.

Any of you guys know were i can find 2010 te 250 service manuel. All of your links a really grat but missing the 2010

Thanks

Check back through the thread and call Hall's and ask them if they have it on CD.

The worst part about the manuals is that they convert EVERYTHING into SAE units. So your 8mm wrench becomes a 0.315in wrench.

You can strip out the non-english parts of the manuals using a nifty little free program called PDFTK Builder, here:

http://portableapps.com/apps/office/pdftk_builder_portable