250-500cc settings carburation wr 360 1994

hello anyone know the factory settings of the carburetor mikuni 38 or dellorto 37 i have two carburators and dont know jettings ,needles thanks

I got this info from HUSQVARNA WXC-WXE 250-360/94 USA PARTS CATALOG PG 124
HI SPEED JET = 450
LO SPEED JET = 40
THROTTLE PISTON = 3.5
METERING PIN 6AEJ-64
METERING PIN POSITION = 5
IDLE MIX ADJ SCREW 1e 1/2

hope it helps!

Toss the Dellorto in the lake, bin, under a steam roller etc and do the same with the TM carb as well!!!

Do yourself a favour and sort out a Keihin PWK 38 from a KTM300/250 or the Mikuni TMX from WR250.

Why? The Dellorto is hard to jet meaning that it is very sensitive compared to the Keihin or even the TMX. The TM is the older design and parts availability is more of the issue however, the TM is probably a more economical carb than the TMX.

The Lectron is suppose to the the go with all things carburetted but whatever you choice, don't stay with the Dellorto..it will just bring pain and misery

the 94 TM carbs work fine, the later ones are problematic
but yes if you don't mind a major investment the Lectron is VERY nice

what altitude and temp were you setting your baseline on

Wow, that reply was to a post from 2009, he probably has it sorted by now.

wow, hahahahaha, good eye
if he doesn't by now, he probably never will

LoL...just noticed it...what year is it

Yeah...i was posting for posterity in case other people coming in to the forum was asking the same question.

I just looked at those numbers again and I think the metering pin is missing a digit after the J.

snapshot of the info I posted