Setup for Enduro race in December TE 610 i.e. Dual

Discussion in '610/630' started by amber, Nov 25, 2012.

  1. amber Husqvarna
    A Class

    Location:
    West Germany
    Husqvarna Motorcycle:
    TE 610 ie
    Other Motorcycles:
    TE 449 2012
    Hello,

    Who can give me a suggestion of setup (15:50?) for an enduro race in December posibble mud, snow etc.? Optimized TE 610 i.e.
  2. 1lunger Husqvarna
    AA Class

    Location:
    Bloomfield CT
    Get rid of everything you don't need on the bike! 14/46 is what I run and I love it! It's a big bike for the enduros, but a big guy can pull it off. [IMG] I really only ride in the woods now and with the suspension set right makes a big difference! Good luck!
  3. amber Husqvarna
    A Class

    Location:
    West Germany
    Husqvarna Motorcycle:
    TE 610 ie
    Other Motorcycles:
    TE 449 2012
    Today I used 14:48 and Iwould say it was to long because the ground was frozen with a little snow and I had a lot of problems to get grip on icy ramps.:thumbsdown: I used Dunlop Geomax tyres.
    DSC00222.JPG

    DSC00201.JPG
    juicypips likes this.
  4. 1lunger Husqvarna
    AA Class

    Location:
    Bloomfield CT
    Have you tried the Michelin AC 10 tire? AC is for arctic conditions, it stays soft in cold weather. I love the tire! I use it in the summer and winter here in CT USA. It's great on a mix of terrain and its reversible. [IMG] it's the one on the left.
  5. 1lunger Husqvarna
    AA Class

    Location:
    Bloomfield CT
    Can you run studed tires in a race over there?
  6. amber Husqvarna
    A Class

    Location:
    West Germany
    Husqvarna Motorcycle:
    TE 610 ie
    Other Motorcycles:
    TE 449 2012
    index.jpeg
    You mean ? No, that kind of tyres are not allowed. The race was Saturday, 8th.
  7. Grandia Husqvarna
    AA Class

    Location:
    Amsterdam, Netherlands
    Husqvarna Motorcycle:
    '07 TE610
    Did you win?
    Did the TE610 survive?

    BTW AC10 is a great tire, but is not FIM approved, so it might not be allowed in enduro races.
  8. Gav Husqvarna
    A Class

    Location:
    West Sussex, United Kingdom
    Husqvarna Motorcycle:
    SM610
    Other Motorcycles:
    GSXR 600 SRAD:Sold ZXR 400 H2:Sold
    Where have you got the Sump/Engine guards from for the 610 ?

    I'm in the UK and really struggling to find someone that will ship one here.

    Thanks
    Gav
  9. amber Husqvarna
    A Class

    Location:
    West Germany
    Husqvarna Motorcycle:
    TE 610 ie
    Other Motorcycles:
    TE 449 2012
    @grandia
    No I couldn't win because there were a lot of 200, 250, 300, 350 Enduro's. My 610 was with an XR 600 the biggest bike. You can watch a little video at Nikolausenduro A and B.

    @Gav
    You mean the skid plate? I ordered the skid plate by steahlyoffroad.com.

    3850 Pioneer Rd
    Medford OR 97501
    Phone: 541.535.4896 or Toll Free in U.S. 800.800.2363

    They sent by air mail to Germany. No problems. I must payed the german tax of 19 % at the custom office.
  10. 1lunger Husqvarna
    AA Class

    Location:
    Bloomfield CT
    That the ricochet skid plat. I have the same one. It's bullet proof!
  11. BiG DoM Husqvarna
    AA Class

    Look at the Hyde (Hyde Racing) bashplate - best IMHO. It is poly so is light, does not reverberate and amplify engine noise, slides over objects due to material, easy to fit, very good side protection, indestructible. See fitted in pic below.

    IMG_0871.JPG
  12. Gav Husqvarna
    A Class

    Location:
    West Sussex, United Kingdom
    Husqvarna Motorcycle:
    SM610
    Other Motorcycles:
    GSXR 600 SRAD:Sold ZXR 400 H2:Sold
    Thanks very much for all your help.
    I will look at getting one of the Hyde Skid plates in the new year after I pay off the credit card!
  13. Gav Husqvarna
    A Class

    Location:
    West Sussex, United Kingdom
    Husqvarna Motorcycle:
    SM610
    Other Motorcycles:
    GSXR 600 SRAD:Sold ZXR 400 H2:Sold
    Hi all

    I placed an order for one of the Hyde skid plates but haven't heard from the company. Money has been sent via paypal.
    Tried to get in touch with them a couple of times now, however just wondering what your experiences were like with them ?

    I didn't get a confirmation email from them that I recall.
  14. amber Husqvarna
    A Class

    Location:
    West Germany
    Husqvarna Motorcycle:
    TE 610 ie
    Other Motorcycles:
    TE 449 2012
  15. BiG DoM Husqvarna
    AA Class

    Was the order placed with Hyde Racing USA?
    Contact:
    http://www.hyderacing.com/contact.htm

    OR Hyde UK?

    Greg Snodgrass
    Hydegard Ltd.
    Distributors of Hyde™ protection for United Kingdom, Ireland and Europe.
    Website: www.hydegardbashplates.com
    Tel: 028 91889494
    Mobile: 07542934843
  16. Grandia Husqvarna
    AA Class

    Location:
    Amsterdam, Netherlands
    Husqvarna Motorcycle:
    '07 TE610
    Delivery was very slow 2 year ago. Too bad, 'cause it's a great product.
  17. Gav Husqvarna
    A Class

    Location:
    West Sussex, United Kingdom
    Husqvarna Motorcycle:
    SM610
    Other Motorcycles:
    GSXR 600 SRAD:Sold ZXR 400 H2:Sold
    :( Didn't know there was a UK Distributor!
    I went through the US Site and ordered online. I sent a couple of emails chasing the order up and funnily enough just got a USPS Tracking number.

    Order was placed 4th - 5th January and I think they have only just posted it after chasing them today 23rd January.

    Not great service at all!

    Actually just clicked on the Link Dom and the site isn't up any more. There's no registrar for the domain name now either so must have gone under.

    Heres hoping it turns up some time this year!
  18. BiG DoM Husqvarna
    AA Class

    I have heard a few other mutterings about Hyde USA on ADVRider - pity as excellent products.
    Gav likes this.