1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Shifter drum reassembly

Discussion in '2 Stroke' started by Eaglefreek, Feb 4, 2013.

  1. Eaglefreek Husqvarna
    Pro Class

    Location:
    Fayetteville,TN
    Husqvarna Motorcycle:
    11 WR300
    I spent some time searching with no luck. I'm in the middle of fixing the loose bolt problem with the shifter drum on my WR300 and it came apart and I was hoping someone can direct me in how it is supposed to go back together. I see a dot on it but with no service manual and not paying attention to it before I took it apart, I'm stuck.
    Eaglefreek, Feb 4, 2013
    #1

  2. Eaglefreek Husqvarna
    Pro Class

    Location:
    Fayetteville,TN
    Husqvarna Motorcycle:
    11 WR300
    It's fixed. I spent probably a half hour searching the net for this info with no luck, but it only took me 45 seconds to actually look at it and figure it out. :rolleyes:
    Eaglefreek, Feb 4, 2013
    #2

  3. Xcuvator Husqvarna
    Pro Class

    Location:
    Scholls Oregon
    Husqvarna Motorcycle:
    TE450,610 WB165,WR250 WR360 & XC430
    Other Motorcycles:
    yes
    If it shifts you got it right.:thumbsup: Only can go one way.
    Xcuvator, Feb 4, 2013
    #3