Show me some tail

Alright guys, i took my Husky out today to play in the dirt, in doing so I removed the entire stock tail section (brake light, turn signals, and oh so important mud flap) So now I'm stuck seeing just how sexy it is without all that junk. I'm looking for different ways to tuck the license plate under and possibly an integrated tail light from a sportbike? If you have modified your tail section, please post them up

Baja Designs taillight/plate mount, Uptite Y, dealer removed afew things

I'm using the Baja Designs LED taillight on my TE610 and TE310 and like it:
TE310 taillight
TE610 taillight

Other pictures on the TE310 page show the taillight from different angles. The LEDs are very bright and use less current than the stock assemblies.

ramz...did you get my e-mail or was it a PM on TT?

Back on point...Nate...what year is your bike? I like the small kit that came with the power-up kits on the newer (08+) bikes!

I have one of the UFO models. I think UFO is the actual OEM for the under the fender set up. Some guys will have to replace their rear fender too and replace with a TXC/TC fender.

UFO Tail

Here is what I did. My local shop had a UFO tail with integrated blinkers. I think it looks pretty nice and I havent torn off anymore blinkers since the change.
-Art

Baja Designs with Electrosport blinkers

I have the UFO Rear Fender with integrated LED tail light and the Electrosport flex LED blinkers:





I ordered it from the TT store. Before this, my rear tire ate my stock license plate. I re-ordered the stock one and it did it again, so I found this one.

http://shop.thumpertalk.com/catalogs/Parts_Unlimited_Offroad_2008/default.asp?p=663

Here's another photo of the LED UFO taillight on another bike:

Looks good.........yellow/blue ROCK.

i modded mine by looping out the first race of last year. it was alot lighter then stock when i was done.

rojobigguy,
Why do you have wires running to your License plate bolts?

Might be one of those LED bolts like I have on mine, it’s what you do if you don’t have a light source for the plate, it works great

Here’s mine

The mud flap is not the Entire tail section... DAMHIK

Here's mine post multiple surgeries:


http://www.cafehusky.com/forums/showthread.php?t=8891

I gave up on the plastic and had one made out of Aluminum. (I fall down a lot)

Here's what I've been using since new - the stock rear fender supplied with the power-up kit. I got tired of taking off my turn signals every time I was planning on a serious dirt-ride, so I put on LED strip lights and haven't had one rip off yet in 2 years. I had to replace the flasher relay to get the flashing rate slowed down to the correct speed. Notice the LED bolt light for the license plate - seems many are using them now.
I included 1 photo of the front turn signal too.

Can you or anyone provide a pic of what this one looks like? Seems the power up kits no longer come with the rear fenders, so i'm interested in this one.