1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc Skid Plate

Discussion in '2 Stroke' started by cedarchopper, Sep 28, 2012.

  1. cedarchopper Husqvarna
    AA Class

    Location:
    Bryan, Texas
    Husqvarna Motorcycle:
    CR 165
    Trying to see what skid plate people are using for the newer style frame 2011 and up. Was hoping for P3, but not sure that is happening so open to ideas????
  2. BCdirtbikegal Husqvarna
    B Class

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    2011 WR 150
    Other Motorcycles:
    '08 KTM sx50 jr, 08 pw50
    I have a Scorpion Racing one on my '11 WR150.
  3. PALMER84ONE Husqvarna
    AA Class

    Location:
    Silverado, CA.
    Husqvarna Motorcycle:
    08 TE450 THE ROCKET
    Other Motorcycles:
    12 RS520, CRF150F/230F, YZ250
    Pretty sure Uptite has one and it protects the pipe as well.
  4. Micka Husqvarna

    Location:
    Adelaide
    Husqvarna Motorcycle:
    2011 WR 300
    Force make a bash plate that protects the pipe as well.
  5. Micka Husqvarna

    Location:
    Adelaide
    Husqvarna Motorcycle:
    2011 WR 300
    I use a B&B one in my 2011 Wr 300 which looks smick though all polished nice and strong alloy but it doesn't protect the pipe....
  6. BCrider Husqvarna
    AA Class

    Location:
    Vancouver, BC
    Husqvarna Motorcycle:
    WB165 2008, WR125 2009
    The Scorpion website states 2007-2008. Did you have to modify to make it fit your 2011?
  7. Johnnymannen Husqvarna
    AA Class

    Location:
    Sweden
    Hyde racing. very godd, as long as the clamps doesn,t fall off... A drip of loctite would be good til next time! I need a new front clamp for it!
  8. huskyfrk Husqvarna
    AA Class

    Location:
    los alamitos Ca
    UPtite.. nuff said...
  9. tnttimber Husqvarna
    AA Class

    Location:
    Sonora, CA
    Didn't know uptite made one for these bikes, I'll check that out.
  10. Ron delbosque Husqvarna
    A Class

    Location:
    boise,idaho