sm610 clutch cable

Discussion in '610/630' started by Squish87, Jun 2, 2009.

  1. Squish87 Husqvarna
    A Class

    So I have been on the hunt for a clutch cable for my 06 sm610 and i seem to be lucking out. Everyone that i get is either to short or the cable is the right size and the shroud is to short. Does anyone have any seggestions on where to get one?? I tried Motosportz and they were out of stock and i tried the Barnett cable and it does't fit up. So if anyone knows something about the 1.5 inch longer cable could they please help me out.
  2. Yossarian Husqvarna
    AA Class

    Location:
    the 'Ha
    Husqvarna Motorcycle:
    2008 TE610
    Other Motorcycles:
    Multistrada 1200 Enduro; Tiger 800XC
    I changed to a Barnett on my '08 TE610 so that I could reroute the cable through the triple clamp and under the bars. I'm not sure what you mean by "doesn't fit up"; do you have the right cable?
  3. Squish87 Husqvarna
    A Class

    I tried the barnett but after routing it the same way as the stock cable and adjusting it to the max it still doesn't engage when i pull the lever
  4. Thorton98 Husqvarna
    AA Class

    Location:
    Michigan
    It sounds like your telling us it seems too long. I had to mess with mine (both ends)for a few trys before it was adjusted correctly. Mine is a Barnett cable on a TE610 also. Is there any difference on the SM? I don't think so? We'll get it figured out!:cheers: