1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Source for white tank plastics (250-300)?

Discussion in '2 Stroke' started by Kyle Tarry, Nov 4, 2014.

  1. Kyle Tarry Husqvarna
    Pro Class

    Location:
    Portland, OR
    Husqvarna Motorcycle:
    2012 WR 300, 2006 TE 610
    Other Motorcycles:
    Ducati Monster S2R 800
    Does anybody know of a source for white tank plastics for late model (2012 in this case) WR 250/300s? With motoplastics us out of the business, I can't find any other sources.

    Looked at UFO and Polisport, but best I can tell they only make red (Polisport) and Red/Black (UFO). Black might look good, but I really wanted white.

    Thanks.
  2. boomhauwer Husqvarna
    B Class

    Location:
    Belgium
    Husqvarna Motorcycle:
    WR300, Nuda 900 R
    Other Motorcycles:
    Triumph Street Triple
    I've been looking for them for a long time but also without luck, I've ordered the ones for a 4st TE250 but they are slightly different. The fuel tank for a 4st is a little bit shorter than the 2st WR 250/300. It all depends on how well you want it to fit.. from normal distance you probably ain't going to tell that it doesn't fit that good, but if you're a perfectionist, you won't be satisfied.

    http://store.rtechmx.com/plastiche-...liatore-1/convogliatori-aria-superiori-1.html
  3. duggoey Husqvarna
    Pro Class

    Location:
    NSW, Australia
    Husqvarna Motorcycle:
    2010 TE 310
    Other Motorcycles:
    KTM 690, Yamaha WR200, FGS650(800cc)
    I was perplexed the other day, a gent who lives a few doors down owns a few bikes, mostly newer KTMs and Huskys, I saw him ride by on what appeared to be a "new" KTM blue/yellow Husqvarna, but it had a Husky frame and Xlite motor. Saw it again on his way home, looks like the new blue and yellow plastics must fit the itialian/BMW Huskys. It looked real nice I think.