I just put a new front tire on my 06 TE 610 and found that the Speedo magnet was not in the holder, but on the rotor. For some reason the Speedo worked. When I placed the magnet back in the holder the epoxy that was holding the magnet moves the magnet out about 1/16. Upon remounting the tire on the bike and spinning the wheel I hear a clicking noise which I found comes from the Speedo magnet and holder. The holder has a bit of free play between the front flange and the snap ring which allows it to move in and out. What happens is the magnet pulls the holder against the pick up. Is this common? If not what can I do to eliminate the clicking, if necessary. The clicking is not worrisome, but I don't want to harm the sensor. Your Comments are requested. Thanks in advance.
Lost my magnet, got it replaced, had a ride, got dirty, washed it and found the little rotter stuck on the starter. How in the heck did it migrate there? Boy those circlips are hard to put on, so how did the first one come off? Sorry I can't help out with you issue though, just thought I'd share a wierd husky moment.
