Speedo problem

Discussion in '610/630' started by ghedunk, Jul 19, 2015.

  1. ghedunk Husqvarna
    AA Class

    Location:
    NJ USA
    Husqvarna Motorcycle:
    SM610ie
    Other Motorcycles:
    R100rt, R100rs,Tuono,zg1400, Tuonov4
    My speedo quit working. Magnet is still there and sensor still in place. I have service manual but can't find anything on it. 09 610 anybody have this before ?
  2. blueknob Husqvarna
    AA Class

    Location:
    pa
    Husqvarna Motorcycle:
    2007 te610
    Other Motorcycles:
    1979 harley davidson superglide
  3. ghedunk Husqvarna
    AA Class

    Location:
    NJ USA
    Husqvarna Motorcycle:
    SM610ie
    Other Motorcycles:
    R100rt, R100rs,Tuono,zg1400, Tuonov4
    Thanks Blueknob will try the battery trick.
  4. Stujam Husqvarna
    A Class

    Location:
    Brisbane Austrlia
    Husqvarna Motorcycle:
    09te610, 11te630
    Ye mine did that once and 10 mins with battery disconnected sorted it
  5. Spice Weasel Husqvarna
    AA Class

    Location:
    UK
    Husqvarna Motorcycle:
    08 SM610
    My speedo is giving wild readings, ODO still works, tried disconnecting the battery, didnt help.
    I recently changed my headlight (Trail Tech X2 HID) and have an off switch so the dipped beam can be switched off. I also have an LED rear tail/stop light.
    I have been running with the headlight switched off, so theres little current draw from the battery.
    I have done some googling and it seems that the dash might not like high volts.
    The speedo usually starts playing up a few miles into a ride, which could be as the battery passes a certain voltage, possible overcharge?
    I will try running with the dipped beam on to load the system to see if it will stop the speedo problem.