All 2st Sprocket bolt crossover

Anyone know there are any sprocket bolts that might cross over from other brands for the CR/WR250?

Most sprocket bolts will work, there really isn't much change from brand to brand. You may notice most aftermarket suppliers only make 1 kit most of the time.

i was looking online and found 6M and 8M sprockets cant say as i ever saw a 6M before

Not sure if its true but my local KTM dealer said KTMS use a different taper on there bolts compaired to all other bikes so beware of those bolts.

No need to "crossover". These work:
https://www.rockymountainatvmc.com/...-Sprocket-Bolt-and-Nut-Kit?term=sprocket bolt
Have used the Hub Savers version recently on the Husky too.

Will go see if the local non-husky shop has any aftermarket kits.
I was switching out sprockets from a wheel/tire that i borrowed, and the bolts from my wheel were trashed.
And i need for this weekend

From the link: "Tapered head fits most CRs, KXs, RMs, YZs, KTMs, and Husqvarnas"

OEM Hondas were over $7 per nut/bolt. NOT! I'll order some this week.
Thanks for the help

I feel ya' I snapped a chain adjuster bolt yesterday afternoon just before what would have been 2 days of glorious riding.

OEM husky nut/bolts run around $3 each, I usually get the bolt kit like moose , etc... for 9.95 for the set of 6 and they have a thread locker on the threads as well.