1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc Sprockets

Discussion in '2 Stroke' started by paddy.t, Oct 1, 2012.

  1. paddy.t Husqvarna
    B Class

    Husqvarna Motorcycle:
    WRE 125
    Other Motorcycles:
    Yamaha WR200
    Morning chaps.

    Im after a new set of sprockets and chain for my wr125.
    Just wondering if sprickets from other size/model bikes fit..

    Im in the uk and after a 52 rear... Preferably steel outer ally centre but all steel will do.

    Cheers.
  2. johnnyboy Husqvarna
    Pro Class

    Location:
    UK
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    TM 250f
    racespec.co.uk do Supersprox items at £39.99
    GasGas /suzuki dr items fit as well
    Husky Sport stocks them for around the same money if you do a bit of begging
    Had nothing but good luck with the supersprox items and have run one all year in some horrific conditions and have only adjusted the chain once since fitting
  3. Blakelpd5 Husqvarna
    Pro Class

    Location:
    Tigard, OR
    Husqvarna Motorcycle:
    09 WRWB165
    Other Motorcycles:
    08 CRF450R, 1980 Suzuki Wetbike
    I could be wrong, but I remember being in Bill's Husky and I THINK they told me most rear husky sprockets are all the same, except before mid 90s or something of that nature. I also this there was one model that was an exception, but please look further into this before just buying.
  4. R-J van Hulst Husqvarna
    Pro Class

    Location:
    Cambodia
    Husqvarna Motorcycle:
    WR 125 + 40 = WB 165 and a SM165
    Other Motorcycles:
    Honda CB 400 Vtec 3
    I only have experiences with supersprox (full aluminum) and do run fine.
    I don't see the need for steel ones on a 125 set up its not that you snapping of teeth in a short time

    I run roughly about 60 to 80 hours on a set up depending on how much I dive in the rock quarry to play around.

    Robert-Jan
  5. Gotlabs Husqvarna
    AA Class

    Location:
    Branchville, SC
    Husqvarna Motorcycle:
    12 CR144 X 2!
    I have the supersprox bi metal on my 300 and it has worn out two chains and CS sprockets. Worth the coin IMO. I have the supersprox all aluminum on my 144 and it looks fine after 10hrs. A little cheaper than the bimetal sprox.