125-200cc Squeaky swingarm?

I have a 2008 CR125 and every time I sit on it or move the swingarm I get a squeaking noise coming from the rear suspension and I'm wondering if it's a problem or not, thanks.

Thanks I'll remove it when I get home and grease it.

likely a shot bearing somewhere. you will likely find a bearing full of rust.
and a big on the bel ray grease!!

You are both right I tore it down and found a bearing full of dirt and rust, but it cleaned up nicley and with new grease the squeak is gone. Thanks for the helpful replies.

if you have not already, perhaps pay some attention to the linkage and upper/lower shock joints as well..

Yeah I went through them and they were dry and full of rust too.

Twice a year grease them.

when did they lose the zerk fittings? my 95 has zerks for the swinger by the shock.. prior to my model the swinger pivot bolt was gun-drilled with a zerk on the end.