1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc steel aftermarket wheel spacers?

Discussion in '2 Stroke' started by shawbagga, Sep 17, 2012.

  1. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    are there any available, i believe gas gas make them for there bikes? my alloy ones are getting very thin(gouged from seals) & i seem to be going through wheel bearings at a rate of knots! any other tips to make my bearings last longer? i dont pressure wash either!
    shawbagga, Sep 17, 2012
    #1

  2. Gotlabs Husqvarna
    AA Class

    Location:
    Branchville, SC
    Husqvarna Motorcycle:
    12 CR144 X 2!
    I use the enduro engineering spacers and they have lasted longer than stock. Wheel bearing secret, grease them with a quality waterproof grease before install. I pressre washer with no bad side effects so far.
    Gotlabs, Sep 17, 2012
    #2