1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc steering stem brgs?

Discussion in '2 Stroke' started by 3dhunt, Jan 1, 2015.

  1. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    Does anyone have a steering stem bearing kit available besides a factory dealer. Ordered an All Balls kit from Rocky Mountain but its not right. When I go to the All Balls site they don't even list one. Anybody else????
    3dhunt, Jan 1, 2015
    #1

  2. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    found them at NAPA L45449 brg L44610 race
    3dhunt, Jan 2, 2015
    #2

  3. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Whats the number on the bearings your taking out?
    My bike 360 were trailer bearings timikn l44610 were the sealed ones. Not sure if those are the same as your 250 or not but im 83% sure they are the very same.
    juicypips, Jan 2, 2015
    #3

  4. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    same as the swedes!
    justintendo, Jan 2, 2015
    #4

  5. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    pretty much 1980 to 2014 except 1991 and 92 are the same from my looking
    2premo, Jan 2, 2015
    #5

  6. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    lol, my 79 wr250 also
    justintendo, Jan 2, 2015
    #6

  7. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    ya the numbers I listed above were the bearings I took out
    3dhunt, Jan 2, 2015
    #7

  8. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Swear that those numbers wernt there when i posted my reply... Yup standard trailer bearings grab thdm off ebay for bext to notthing or a teailer company for £4 each here. But timkins are tripple that. Your call
    juicypips, Jan 4, 2015
    #8

  9. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    after i got started replacing my brgs I noticed my wxc steering head has a FRONT steering stop on it but my lower triple has adjustable bolts on the REAR. Someone has welded the stops on the frame. They did a good job doin this but it answers maybe some other questions, like why the Husky brand front fender holes did'nt line up. Also the 45 Zoke Magnums i've seen on other '96 models have a Husky (H) on the lower outside part of the fork, mine dont. mine also has a carbon fiber looking decal on the lower legs also which the '96 KTM's had. So i'm not sure what I have.
    3dhunt, Jan 4, 2015
    #9

  10. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    Zokes on my '96

    Attached Files:

    3dhunt, Jan 4, 2015
    #10

  11. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC


    they did come with 45mm conventional forks that year, not sure about the decal business
    there should be an H (gun sight) on the bottom of the lower leg as i recall
    my KTM 50mm conventional forks had KTM on the bottom part of the lower leg
    2premo, Jan 5, 2015
    #11

  12. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    ya mine does't have either logo on the fork bottoms
    3dhunt, Jan 5, 2015
    #12

  13. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    odd..i have the showa 43mm on my 95 with the logo cast on each bottom. perhaps they are aftermarket forks and not from another model?
    justintendo, Jan 5, 2015
    #13

  14. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC

    i was thinking along that train but what struck me as odd is why would they buy aftermarket that they already had
    2premo, Jan 6, 2015
    #14

  15. 3dhunt Husqvarna
    A Class

    Location:
    Woodward, Oklahoma
    Husqvarna Motorcycle:
    '96 250 wxc
    Other Motorcycles:
    1976 yamaha dt 175
    Ya kind of odd, they are goin to House of Horsepower friday, Rick will know where they came from.
    3dhunt, Jan 6, 2015
    #15

  16. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    could have been crashed and bent, who knows. you mess around with old bikes long enough you will see some weird things
    justintendo, Jan 6, 2015
    #16