Strada Rear Tire Width Change

Discussion in 'TR650' started by hikewithmike, Jun 11, 2014.

  1. hikewithmike Husqvarna
    B Class

    Location:
    Sammamish, WA
    Husqvarna Motorcycle:
    TR650 Strada
    Hello,

    Have been doing some browsing and can't seem to find my answer. Given the width of the cast wheel on the Strada, will going to a 130 rear (as opposed to a 140) be a bad choice. I am looking at tire options for a slightly more agressive tire on forest roads, and there seem to be more options for a 130 tire.

    If this information is on the forum somewhere, sorry I missed it.
  2. msmith345 Husqvarna
    AA Class

    Location:
    Shawnee, KS
    Husqvarna Motorcycle:
    '12 WR250, '92 360, '80 390
    Other Motorcycles:
    '72 Yamaha R5, '17 SV650
    I'm planning on going to either a Mitas E-07 or a Heidenau K60 in 140/80-17.

    You might be able to go for a 130, they're mostly recommended for a 3" rim, I think we have a 3.5" rim. You'd be losing a lot of contact area though (re: traction), and at least with the K60, you'd end up with a different tread pattern on the 130 vs 140. Also, most 130 tires are not designated for tubeless, so that would be a problem -- if you like having your tire hold air. You can run a tube in a tubeless tire, but not some much go tubeless with a tube tire.
  3. hasenpfeffer Husqvarna
    Pro Class

    Location:
    CO
    Husqvarna Motorcycle:
    TR650 Strada
    I've seen a few posts of people actually using a 150 (150/70, i think?) rear instead just fine, which also adds a few extra choices.