Strap for battery 2013 TXC310

Anyone have pictures of how the rubber strap to hold the battery down goes ?? I have the strap but have no idea of where the right side is supposed to hook. I assume the left side hooks to the aluminum beside it but i could be wrong. I can't find anything on any of the parts fische's that show where it hooks or if there are things to hook to that are not on my bike.

I have a 2012 TE310 and just use double stick foam pieces to wedge it in . Never saw a strap, although I sort of remember one on my 2008. So, not much help here

Just looked at the manual and it had a pic showing what appears to be a rubber strap

I never used an OEM strap, long cable ties instead. Pretty sure the 4-strokes I bought from Scott Rocher ('08 TXC250, '09 TXC250, '13 TE310) came that way, as part of their new bike setup...

Has been a while, don't remember details of routing...

No strap on the 2013. The Yuasa would be held in place by the seat where there is a small hard rubber block. If moving to a smaller LI battery pull the tray and put some adhesive foam on the bottom and rest on the ridge on the fender. Add a couple of zip ties through the weep holes on the fender where the battery sits and loop over top of battery. I prefer it lower down so you don't risk anything hitting the frame cross member. The manual seemed to share some images with the 2012 and maybe why showed a strap.

I ditched the original strap at once. I use a rubber strap you buy for trailers, trucks etc. They are available on bobins by meter so you cut the length you need.

https://www.klippanslap.se/gummistroppar/gummistropp-metervara

I did zip tie mine as well. And i dont think I have that piece of rubber underneath my seat om the TXC. I will check. I know the zip ties work but you have to remove them every time you want to clean your air filter. Getting to the air filter sucks period.

Zip ty racing has a battery strap. https://ziptyracing.com/collections/husqvarna/products/zip-ty-strap