Strap in battery on '10 TE250?

The seat just holds it down.

Do you guys stap it down?

If so, how?

You can attach adhesive velcro to the back of the battery and the fender, although that makes it a little more tricky to remove with the new battery tray being used. You can string a couple of zip ties together between subframe to hold it also. Keep an eye on the top of the battery case as your seat can rub through it eventually. You can put some inner tube rubber or something similar on top of the crossmember behind the battery as a spacer to help keep the seat from eating into the battery.

OR, snag a Turntech Lithium battery and have all kinds of room under there!

the dealer memo fix was zip ties in addition to the rubber strap. Works for me rich.......good job at the season opener enduro you old fast bum!

if the filter is the same as the 09, i would leave it loose or velcro, i have to lift the battery anytime i clean the filter or install the cover to wash the bike