250-500cc Suspension front and rear - WR 250 '00

Hi, i need ask you guys what is a original settings compression and rebound. My husky is WR 250 '00
Im newbie in enduro riding but i want a good settings thats why back to original settings.

Race Sag is 75mm - i know the correct is a 95-105 i want change it today.

Sorry for english!

For sag settings, this is a great thread: http://www.cafehusky.com/threads/suspension-setup-recommendations.17268/

For clickers, a good starting point would usually be about 1/3 to 1/2 of the way out. So, count the total number of clicks from fully closed and put them at 30% to 50% of that number. Then adjust them from there.

Thanks Kyle! I was searching thats answer! Thanks again! I will read but my bike is old and im amateur/newbie in enduro.
I find a standard settings for front:
Comp - full open
Reb - 10 click out

And find in manual a preload and sag settings. But dont know yet how set click for "shock"

Preload and sag are all in that thread I linked to.

"For clickers, a good starting point would usually be about 1/3 to 1/2 of the way out. So, count the total number of clicks from fully closed and put them at 30% to 50% of that number. Then adjust them from there."

ok sorry for my bad english thats why i ask again.
Thanks! Again!