250-500cc suspension problem

Hello.

I have some problems with the suspension of mine wr250 2009.
It has the sachs rear Shock en front fork with triple clamps from TC250 2013 and forelegs kayaba 48mm wr300 2012.
I was today riding at an mx track with deep sand it is almost impossible to drive it an a mx track the steering is very awkward.
It feels like the front fork is standing to strait or the rear is to high.
Maybe the offset from the kayaba tc250 trippleklamps is a litte less but it won't change the angle of the fork.
I think wenn i wil make the rear sachs Schock shorter and the tail wil drop 3 to 4 cm it will be mutch better.
Has anyone a good or better idea what to do.
Does the wr250 300 drive al awkward compare to tc250 txc310?
Hope some wane could help.

Best regards

Hello I did some searching and read about the head angle an take.
The tc250 has 26 degrees and the wr250 27 degrees.
Then wen I wil lower the back of the bike 20 30mm I think it would be much better.
Does anyone shortened a rear Schock on his wr?

It depends how fast you ride/race. You can find many people that will lower your shock or fork. Best to look at vinduro's suspension setup thread; start there.

Thank for your answer I will look