Suspension problems...help!

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by redbone, Jul 19, 2010.

  1. redbone Husqvarna
    AA Class

    Location:
    Salisbury, NC
    I have a 09 WR300, I had the suspension sprung and revalved for my weight. The suspension seems to be pretty good for the most part, maybe a click or 2 away from real good? Anyhow, I now have a clanking noise coming from the front forks on any hit from medium to large. The noise is coming from inside the forks I'm almost 100% certain. It kinda sounds like maybe the springs are slapping against the inner walls of the fork? I know the new springs were manufactored by Cannon Springs. Any advise with this issue would be greatly appreciated. I also noticed when I got my bike back the rebound was set at 4 clicks out from full seated position. I don't know if this means anything or not but that sure seems like alot of rebound damping for a new setup. Please advise!:confused:
  2. ray_ray Mini-Sponsor

    Location:
    The Philippines
    Husqvarna Motorcycle:
    08\013 WR250, 010 TC250, 012 TC250
    Why not return them to the professional who worked on them and ask him these questions?
  3. ghte Husqvarna
    Pro Class

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    The sound does not sound encouraging. It may be the springs or it could be the leg, might have a bushing issue. Take Rays advise and take her back to the suspension guru to opine.
  4. redbone Husqvarna
    AA Class

    Location:
    Salisbury, NC
    Yep, she is going back to the doctor! Hopefully theres no internal damage! Tuner said bring back and he'll make it right.