Swedish Flag Decal Placement

I'm having two tanks painted soon – a '74 250CR and a '82 430CR. I'm looking to see if anyone has any reference photos they could share that shows the relative placement of the flag decals.

Thanks,

3/4" to 1" centered.

tank NOS 430 1982 black
sale in ebay motors USA
(1200 $ US )

this ?

Yes, that's the '74.

You do know that there is two flags?

One top

One bottom

Based on years.

I've done quite few tanks and they are centered back 3/4 to 1 inch.

Guess it how they eyeballed it that day.

I have also seen them crooked some.

I have the lower left, flag for the '74 and the upper, right flag for the '82.

I assume you mean 3/4 to 1 inch centered back from where the top plane of the tank begins (?)

dartppyt, I've been thoroughly enjoying your restoration builds. I certaintly don't have the skill nor shop you have but, nonetheless, I'm almost at the point of beginning the build on my 1982 430CR and plan to document on the restoration projects page.

for you MOTOFO is
tank 430 1981 !
(original tank)

Yes you measure tank from top center back 3/4 to 1 inch. That means weld as well.
I use a piece of blue painters tape for line up. Stick it on your shirt or pants so some lint gets on tape so not as sticky.
Then you can use a pen to mark your center. I kinda fold flag decal in a crease to find its center.
Then apply along tape edge and then you know you are aligned.
Thanx for comments! You got some nice bikes!

decals =14 cm !