swing arm bushes '02 wr360 help

right im in need of some details ive found online someone who is doing 93-95 swingarm bush kit but ive not got the dimensions for these and hes unwilling to measure as theyre boxed...
my bushes are 50.5mm x22mm with the flange 34mm. are these standare throught the range as im not going to take a £45 punt to have em sent back due to not fitting.

HELP PLEASE

On an 02 WR360? All Balls Part Number 28-1119

Swingarm lengths may have varied between the years but l'm pretty sure they all used the same dimensions for the bearings/bushes.

yeh these arnt allballs theyre pro x, thank you i may just get all balls as they seem popular

+1 OMG...allballs 'll sort ya out.

That is correct...the same form like 1998 to current. Yamaha YZ bearings are the same size.

the bearings are 22x18 and made by torrington with inbuilt seals these are what i would like to replace with, all balls now use teflon bushes without rubber seals, also no image stating if they have flanges sleeves or not. im wondering if these dont have the flange how does it stop the lateral movment of the swing arm.... concerns concerns..
yammy yz breaings. are the sleeves the same?

The All Balls kit comes with the flanged sleeves, although the one I got was missing one

Yamaha bearings dont have seals.

ok well ive ordered the kit. do i need to lube the teflon? if so is lithium based stuff suitable? ive googled it and cant make my mind up if its self lubricating as wiki states teflon is non stick and is available as a lubricating spray...really unclear? sorry if im being dense but ive not lost anything by asking..
thank you for your help so far

Use marine grease mate...remember it's a dirtbike and it's going to be exposed to mud and crap so pack the bearings down with quality marine grease.

sweet "ohmygewd" thank you

No probs!!!