1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Swingarm bearing install, flush?

Discussion in '2 Stroke' started by dunc, Mar 28, 2013.

  1. dunc Husqvarna
    AA Class

    Location:
    Toronto
    Installing some new swingarm bearings 07 CR125.

    Do they go flush with the swingarm or in a few mm??
    Inner the same as outer?

    thanks
    Duncan
    dunc, Mar 28, 2013
    #1

  2. Aviduser Husqvarna
    AA Class

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    08 cr 165
    The ones I replaced mine with came with extra dust seals. So on the outside I pushed them in to allow for the seals.

    The inner side has that flange. Think the bearing has to be pressed in to fit that.
    Aviduser, Mar 29, 2013
    #2