1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

swingarm

Discussion in 'Vintage/Left Kickers' started by megagobby, Jan 16, 2011.

  1. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    im looking at getting swing arm for my wr250 83 . will a xc 125 83 be the same size ? thanks:thumbsup:
    megagobby, Jan 16, 2011
    #1

  2. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    I doubt it, the WR has less rear suspension , then the XC or CR models.

    Husky John
    ruwfo, Jan 16, 2011
    #2

  3. LEADVILLEHUSKY Husqvarna
    A Class

    Location:
    COLORADO
    I can measere mine i have a wr and xc and cr all 23 inchs
    LEADVILLEHUSKY, Jan 16, 2011
    #3

  4. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    that would be handy :thumbsup:
    megagobby, Jan 16, 2011
    #4

  5. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    the 1 im looking at on fleabay is a 125 xc 83 and its 23 1/4 inches long .
    megagobby, Jan 16, 2011
    #5

  6. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    think im just going to get the bits welded on my swing arm. i just need the measurements/ dimentions for 2no chain slipper tabs, side stand bracket, and chain tensioner tube . maybe some one can assist me with measurements etc and a source for sidestand bracket? thanks
    megagobby, Jan 16, 2011
    #6

  7. mr stainless Husqvarna
    A Class

    Location:
    united kingdom
    that might not be as easy as it sounds...unless you have some chrome moly material around and some rods to weld it with ....
    mr stainless, Jan 16, 2011
    #7

  8. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    cheers graham. im going to send swing arm to charlie preston to do work .:thumbsup:
    megagobby, Jan 17, 2011
    #8