1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

TC 250 Carb - Odd Sound.....

Discussion in '4 Stroke' started by mxer74, May 6, 2010.

  1. mxer74 Husqvarna
    AA Class

    Location:
    Pawnee, IL
    Hey guys,
    Just curious if anyone else is having this same issue with their 2010 TC 250's? At high RPMs and only at high RPMs, the bike makes a fluttering/whispering sound........anyone elses do this? The bike runs and sounds awesome low to mid. Honestly, the power even feels good up top BUT just sounds bad. I just hate it because I know people get the assumption that it's a bad motor/bike, but my results definitely prove that wrong. We have tried a million different jetting settings with no luck so maybe it's not even carb related. I ride my buddies 2010 TXC 250 and it does NOT make this sound. I'm about to the point of just dealing with the noise because I am happy with the performance BUT I would just as soon have everyone who hears it feel the same way. Thoughts.....?????? Thanks!

    Blake
  2. wally111 Husqvarna
    B Class

    sound like rev limiter
  3. Henner Mx Husqvarna
    B Class

    Location:
    Wolcott NY
    Blake my 2010 TC makes some funny noises when holding it wide open i would say kinda its gasping for air with a flutter sound not sure if thats what you hear but im asuming its normal as ive had no power or jetting problems.
  4. mxer74 Husqvarna
    AA Class

    Location:
    Pawnee, IL
    Any one elses do this.......any other ideas?
  5. krieg Husqvarna
    Pro Class

    Location:
    Matthews, NC
    Husqvarna Motorcycle:
    Many in the past
    Other Motorcycles:
    '12 Triumph Scrambler
    Ours kinda makes little whispy, squeaky, poppy noises at idle. You can really tell when the seat is off and you hold your head close to the filter. Haven't really heard anything at WOT and Cody hasn't complained about any WOT noises.
  6. snoplw Husqvarna
    AA Class

    Location:
    Moorhead, MN
    I have not had that noise come out of it yet but I have blown a head gasket (my fault) I reinstalled the head an I believe I fouled it up. pressurized the crak case and blew almost all the oil out the valve cover breather. Other than that nothing