Te 510

Hey People,

I'm new around here,just bought a TE510 2010 last week and so far i love it.First question is what do i need to know about these bikes with mod's etc? and secondly it didn't come with a horn the previous owner removed it.I have bought another horn and i cant find the wires to connect this.Can someone send me a photo or explain where these wires are?
Dale

Second sticky at top of the page Living with a 2010 TE 510.....I'll look at my horn and snap a pic.

You have got to powered it up. With out that, it is extreemly disappointing. After, it is a great machine. Other than that, I did put a 610 rack on it to haul some extra fuel and got a front fender bag.

What else is there to do? I have been advised against any bash plates and disk guards. I did get an extra set of plastic for resale purposes. I can have my cake and eat it to.

Remove the swingarm mud flap and use a good sharp pocket knife and shave off the 2 ridges along the back, then reinstall. They will rub grooves in your swingarm. Make sure your fork sliders are not rubbing on your forks, they will rub grooves. Loosen and position and install fat zip ties around fork bottoms for good measure. Secure your fuel pump with zip ties. Do something for your clutch slave piston, Up-Tite x-ring or 7602 piston. Get a Up-Tite skide plate, (mass coverage and mass cooling, the best). Get i-Beat, and power up.

Then go wipe that smile off your face.

This is enough "have to's" for me not to buy one. Thats crazy to buy a new bike then have to do all that just to make it right!!!