I have a 2007 TE610 that i just purchased last week. It only has 650 miles and I absolutely love it. Was riding Saturday and had a 1mph tip over. The bike landed on the handguard so no harm no foul. Unfortunately, after I picked it up and started it the dash computer started doing this??? I checked all connections and don't see a problem. I took the negative cable off the battery hoping it would reset but nothing. As I was riding back home, the dash would sometimes start working again showing my speed, tach, etc. but then it reverted back to this. Any ideas? [/IMG]
How long did you disconnect the battery??... Sometimes it takes a good 15 minutes or so to clear a funky operating dash.
Check the magnet on your front rotor. My cluster started acting up right before I put my bike in storage for a year. While I was away I forgot about it but I came home and was doing maintenance when I noticed the tiny magnet had come out of its seat and remembered that I had had cluster issues last season. It was still magnetically stuck to the rotor, though, which accounts for the sporadic operation. I cleaned out the seat and glued it back in. No issues now and I ride my bike pretty hard. Here's a thread from AdvRider. Careful you don't get blood clots in your legs...it's a long read if you're not an EE . http://www.advrider.com/forums/showthread.php?t=482490 D'OH...I see you already posted there - nevermind .
I have an opportunity to buy an 06 SM 610. The owner says the speedo/tach go in and out and the lights blink for a milli second every once in a while. I was doing some research on the 06 SM 610 and read that they had a lot of other problems as well as with the dash. Any responses would be greatly appreciated. Thx, Larry
