te 630 seat lifting up at front

Discussion in '610/630' started by MotoXotica, Sep 15, 2010.

  1. MotoXotica Husqvarna
    AA Class

    Location:
    Vacaville
    has any one with a 2011 te 630 experienced the front of the seat lifting up alot.seems like the front latching point under the seat maybe getting tore up and not securring the seat well.ann
  2. T Stretch Husqvarna
    B Class

    Location:
    Sacramento
    I have noticed that. When I took off the seat I noticed that it is starting to wear down at the front latching point. Is there any recourse from the manufacturer to replace the seat if this becomes an issue?

    Attached Files:

  3. rajobigguy Administrator

    Location:
    So.Cal.
    Is the 630 the same seat as the 610? On my 610 the front began lifting so I glued a couple of washers under the post to spread the load and space it down a bit. No more problems.:thumbsup:
  4. MotoXotica Husqvarna
    AA Class

    Location:
    Vacaville
    630 and 610 seats are quite different.dan
  5. T Stretch Husqvarna
    B Class

    Location:
    Sacramento
    I glued one wascher with JB Weld and it took out alot of slack, not all, so I am in the process of trying another wascher. Need to wait for it to dry to try it out.
  6. jtemple Husqvarna
    Pro Class

    Location:
    Papillion, NE
    Husqvarna Motorcycle:
    2011 TE630
    Other Motorcycles:
    2013 Kawasaki ZX-14R
    I haven't had any problems with mine yet.
  7. organ donor Husqvarna
    Pro Class

    Location:
    Berlin
    My 630 also ok. But maybe different as we tend to sit further up on the tank on an SM
  8. T Stretch Husqvarna
    B Class

    Location:
    Sacramento
    I added another wascher and it fits nice and snug. I think my weight fits right into the V of the seat and wants to lift the front up which caused it to rub.
  9. oksanaut Husqvarna
    C Class

    Location:
    San Francisco, CA
    Mine is doing the same... But I don't sit in the V that much :P