1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

te410e low on power or is this normal help please!!

Discussion in '4 Stroke' started by haybaler, Oct 20, 2009.

  1. haybaler Husqvarna
    C Class

    Location:
    Norfolk U.K.
    Hello, to all, please can someone help, with some info, i have recently acquired a te410e 2000 in the year, its seen active service for the last couple of owners i think, but prior has been carered for, its done 6500 km possibly more as i have found a bill for new speedo cable a few years back in the owners book.

    the bike i feel should be giving more of a lively response, but as i have never riden one before (husky and a 400 ) im unsure, its geared 13/48, that gives it 12% lower than stock, i have upped it to 15/48 basicaly a gnats over stock, my problem is it seems to me that its not willing to lift the front at all, with either gearing, on the throttle, but will happily get up to 140kms + , it starts on the button, probably turns over twice if that before firing into life.
    I have checked valve clearances all OK, replaced throttle needle and float valve, and throttle spring, new ngk plug, new twin air filter..

    So people, am i wanting what it was never capable of or is she not well?
    I choose this model with a bit of general all round riding in mind, back roads, green laneing, the odd low key hare and hounds enduro, and with the view to spring summer riding putting some road wheels on her and super moto styling it, but one thing i was looking forward to after 15 years of road biking and returning to of roaders was popping the odd wheelie for fun, let alone when off roading, trying to pop the front up to assist navigation of tree branches etc, but nothing, apart from a red face pulled back muscles and a dislocated shoulder from trying....
    Please help....:confused:

    kind regards
    to whoever can help

    :banghead:
  2. wersmokin Husqvarna
    AA Class

    Location:
    Houston, TX
    Husqvarna Motorcycle:
    1994 WR 350 (sold)1998 TE410 (sold)
    Hello,

    I have a 2000 TE410E as well. she has been sitting for 4 years. I installed a new battery and she came to life with no problems. They are a great bike but needs some extra kick. You can try re-jetting the carburator or even doing a new topend if you want higher compression. I ride mine hard and fast and I am in the process of upgrades. She only has 2k miles on her. Let me know how it goes.

    Colin
  3. rabskyline Husqvarna
    AA Class

    Location:
    Sunshine Coast,Queenslander !!
    Husqvarna Motorcycle:
    2014 te250r
    Other Motorcycles:
    Yer maw !
    i rode one of these before buying my 510 a while back.... went like hell ! so i reckon there's prob a carby issue ....

    my 510 has also been a different animal since it was jetted and had exhaust modified.. major difference.. just a thought..