TE610 - Cooling Fan Stays on Constantly

Discussion in '610/630' started by Navaho6, Dec 19, 2010.

  1. Navaho6 Husqvarna
    B Class

    Location:
    Baton Rouge, LA
    When my TE610 was brand new, I had to use full choke to get it started when cold. Now, all of a sudden, the bike will not start on choke. It is harder to start and will only do so with no choke. 1800 miles on the bike.

    I had to replace the battery this week. Installed a 12ah, 220 CCA battery (same specs as oem). Valves were adjusted a month ago, and it started fine then. I checked the electrical system out thoroughly. No issues.

    The other strange thing is that the cooling fan comes on as soon as the engine starts and stays on all the time. :confused:
  2. xymotic Husqvarna
    AA Class

    Location:
    Federal Way, WA
    U gots a Bad temp sensor.
  3. Navaho6 Husqvarna
    B Class

    Location:
    Baton Rouge, LA