1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC The latest cockpit set up '14 TE300

Discussion in '2st' started by robertaccio, Oct 3, 2015.

  1. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    cockpitte300.jpg
    robertaccio, Oct 3, 2015
    #1
    wrx, 454x, JPinNC and 4 others like this.

  2. wrx Husqvarna
    Pro Class

    Location:
    845 newyork
    Husqvarna Motorcycle:
    1973 to 1986 husky's various models
    Other Motorcycles:
    RM -250 / Buell / Penton 400 mc5
    looks like the dash board in Vaders TIE fighter LOL very very trick.
    wrx, Oct 23, 2015
    #2

  3. Ken Hynes Husqvarna
    AA Class

    Location:
    Mississauga, Ontario, CANADA
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2014 Sherco SE R 2013 Yamaha WR450F
    How do you like the Flexx bars?
    Ken Hynes, Oct 27, 2015
    #3

  4. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    been using them since 2011 very nice add on, I stick with the yel comp/red reb combo with about 3 threads of preload
    robertaccio, Oct 27, 2015
    #4

  5. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    Looks sweet man. I bet it's a smooth ride. Approximately how much higher are the bars? I'm hopefully going to go with a gpr my self but curious how much higher the bars will be? Did the mods interfere with odo/Speedo location
    87husky500xc, Oct 29, 2015
    #5

  6. Husq-a-daygo Husqvarna
    AA Class

    Location:
    Rancho San Diego
    Husqvarna Motorcycle:
    15' TE300, 16'FE450
    I just picked up the under bar GPR kit for my te300 and it looks like 1/2 to 3/4" higher bar attachment. Also kit comes with shims to raise the bike computer off the triple. GPR pro kit with the upper triple clamp has no appreciable bar rise.
    Husq-a-daygo, Oct 29, 2015
    #6
    robertaccio likes this.

  7. Husq-a-daygo Husqvarna
    AA Class

    Location:
    Rancho San Diego
    Husqvarna Motorcycle:
    15' TE300, 16'FE450
    More like Vaders "Zip TY" fighter
    Husq-a-daygo, Oct 29, 2015
    #7
    87husky500xc likes this.

  8. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    Definitely good info thanks. Depending on the price difference the 1/2 to 3/4 could be lived with. Will surely be getting one at some point either way.
    87husky500xc, Oct 29, 2015
    #8
    Husq-a-daygo likes this.