These bearings should be fine to run right?

Discussion in 'General (Main)' started by Motosportz, Jul 18, 2014.

  1. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    :) I unearthed these from a YZF450. Pretty sweet huh?

    [IMG]
    Motosportz, Jul 18, 2014
    #1

  2. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    Is that the new "eco grease" I have been hearing about? 100% biodegradable, water and dirt based.
    Colo moto, Jul 18, 2014
    #2
    Dangermouse449, 268fords and Motosportz like this.

  3. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
    Ah hell, they look good!
    :) :) :) :)
    268fords, Jul 18, 2014
    #3

  4. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    Looks like a stock Yamaha part.
    rancher1, Jul 18, 2014
    #4

  5. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
    You can run them again!! :)
    Dangermouse449, Jul 18, 2014
    #5

  6. Zomby woof Husqvarna
    Pro Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    2011 CR 150
    Clean them out, pack them up, and good to go
    Zomby woof, Jul 18, 2014
    #6

  7. Super5onic88 Husqvarna
    AA Class

    Location:
    Perth, Australia
    Husqvarna Motorcycle:
    SMR 449
    Other Motorcycles:
    RGV 250
    Spray em with some CRC good to go!
    Super5onic88, Jul 18, 2014
    #7

  8. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    thanks guys, just repacked them with nice clean mud and hammered them back in with a drift punch, should be fine. :)
    Motosportz, Jul 19, 2014
    #8
    shawbagga likes this.

  9. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
    Should of used a log for a punch. The wood fibers would help with friction!
    268fords, Jul 19, 2014
    #9

  10. Zomby woof Husqvarna
    Pro Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    2011 CR 150
    Good choice on the mud, but IMO, bearings are overrated, just like brakes.
    Zomby woof, Jul 19, 2014
    #10
    268fords likes this.

  11. Chef Husqvarna
    AA Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    08 Cr165, 09 Wr165
    Other Motorcycles:
    01 Husaberg FE650, 07 BMW 650 Dakar
    That's probably why it had all the starting problems...should be ay ok now. :)
    Chef, Jul 19, 2014
    #11
    Motosportz likes this.