1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Thread pitch and size?

Discussion in '4 Stroke' started by Swampds, May 13, 2010.

  1. Swampds Husqvarna
    AA Class

    Location:
    Sarasota Florida
    Does anyone know the thread pitch and size for the two screws attaching the fuel valve going to the tank?

    I also would like some recommendations for sealent for where the rubber boot goes into the airbox. It looks like HSQ used some black RTV. I suppose that would work just fine.

    BTW this is for a 07 te450. TIA!
    Swampds, May 13, 2010
    #1

  2. Swampds Husqvarna
    AA Class

    Location:
    Sarasota Florida
    I forgot that the Clarke tank has different size screws for the valve....can anyone help me out with this?
    Swampds, May 13, 2010
    #2