1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc TMX from 99 same as newer?

Discussion in '2 Stroke' started by old3, May 16, 2013.

  1. old3 Husqvarna
    AA Class

    Location:
    NJ
    I'm considering a JD jet kit for my 99 WR125's TMX carb. Anyone know if the new ones match the older models? Their kit is listed as 09 up.

    Thanks.
    old3, May 16, 2013
    #1

  2. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    Not sure if they kit would work for your carb. Sounds like the JD kit is actually for the newer TMXx carb. My bike is an 08 and it has the old style TMX.
    PowerKord, May 16, 2013
    #2

  3. old3 Husqvarna
    AA Class

    Location:
    NJ
    Ah, OK, thanks. Wasn't aware of any change to even the name. Any other opinions?
    old3, May 16, 2013
    #3

  4. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    best bet old3 is to email JD Jetting direct, they're very helpful and will sort you the correct jet pack.
    ohmygewd, May 16, 2013
    #4

  5. old3 Husqvarna
    AA Class

    Location:
    NJ
    I spoke to them just before starting this thread, they weren't sure if the kit they have will work on the older TMX. I wonder what the differences are in them.
    old3, May 17, 2013
    #5