All 2st Tmx Square Slide Needles

I need to go richer on the needle on my 2006 Cr125 (now 144- thanks Walt!) and I need a 6DJ8-59. All I can find online is a 6EJ8-59. Are the 6DJ8-series needles only available from Husky? What's the difference between an E and a D?

Please don't say get a Keihen, or an Amal, or a Bing, or a Jikov. I've only got $20 to spend at the moment.

Thanks,
Craig

Pm John01, see what the needle is in one of my old TMX. Think it is 6dgy ?? 59.

Front/rear divider really wakes that carb up with that needle.

Then you can get one from halls or jetsrus.

Hey Darin,
Those Riders Edge valves and stacks made a huge difference in the forks, it's like a normal motorcycle now. Haven't got the jetting sorted out on the 144, but as it stands the forks are the biggest improvement.
Do you think the divider plate would make as much difference with a MX track bike?

Glad to hear it, do a post up in common topics, suspension set up.

The divider in front with that needle really brings out torque on bottom. If you want little more top end don't put a divider in the rear.

Jikov!!! sound like an old CZ guy.

Actually an old Ossa guy, but saying IRZ was going to be really arcane.

I race an AJS Stormer at the moment. The '73 Cr125 Husky is down with crash damage. The Phantom just wore out.

Love them Ossa's