125-200cc to owners of recently purchased bike

check your stearing head nut !!!. mine was bareley finger tight. the second ring that u use a punch on to losen was also finger tight!!. the good to the story is there was plenty of grease on both top and bottom bearings. linkage was opposite. needed a snipe to loosen bolts. almost no grease on the needle bearings. i had about 4 hrs on the bike. i should no better and check that shit before first ride. this is on a 13 cr 125. the thing is on my previous 20 bikes 19 yzs and one ktm, it was a waste of time. lots of grease on all bearings and proper torque nuts. i love my little husky though!!!.