1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st tomaselli bars

Discussion in '2 Stroke' started by marcmo0, Nov 22, 2010.

  1. marcmo0 Husqvarna
    AA Class

    Location:
    Auburn, WA
    Husqvarna Motorcycle:
    09 WR300
    Other Motorcycles:
    Yamaha YZ250
    Will hand guards for oversize bars fit the Tomaselli bars? Or do I have to get something more specific? Gonna buy a pr online, but they all say ProTaper, Magura, or Renthal.
    Thanks.
    marcmo0, Nov 22, 2010
    #1

  2. utopia Husqvarna
    AA Class

    Location:
    Jackson, WY
    Husqvarna Motorcycle:
    WR250, WXC125
    The guards for Maguras work, but you'll have to drill out the ends of the bars to 9/16" diameter to accept the insert. I got some Moose handguards (just like the ones that enduro engineering sells) and that's what I had to do.
    utopia, Nov 22, 2010
    #2

  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    the Trailtech handlebars are VERY good too. Run them on all my bikes as I love the woods version. Most my friends run them also and i have yet to see a bent pair. Good stuff and inexpensive.

    http://trailtech.net/x-bars.html

    No drilling required.
    Motosportz, Nov 22, 2010
    #3

  4. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    Those Trail Tech Bars are nice! I didn't even know they sold them.
    dartyppyt, Nov 22, 2010
    #4

  5. skid Husqvarna
    A Class

    Location:
    NH
    hmmm I have tomiselli bars on my 08 cr 125 and did not have to drill them out for my moose hand guards???
    skid, Nov 22, 2010
    #5

  6. kashlak Husqvarna
    A Class

    Location:
    Maryland
    Same here. I have them on my TE with Enduro Engineering guards and they mounted right up.
    kashlak, Nov 25, 2010
    #6

  7. surfer1100 Husqvarna
    AA Class

    Location:
    Ottawa, CAN
    Husqvarna Motorcycle:
    09 WR250, Memories of past tiddlers.
    Other Motorcycles:
    TM-01 EN 125, 03 125 MX, 09 EN 155
    In some cases you may have to drill out the Tommi's to fit handguards. I had to on my 09.
    surfer1100, Nov 25, 2010
    #7

  8. nimiz1 Husqvarna
    AA Class

    Location:
    IL
    me to on my 2009 wr125/144.
    nimiz1, Nov 26, 2010
    #8