1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Top end help

Discussion in '2 Stroke' started by mkfox, Apr 8, 2014.

  1. mkfox Husqvarna
    A Class

    Location:
    Michigan
    Husqvarna Motorcycle:
    2002 WR250
    Other Motorcycles:
    1973 Greeves Griffon
    Top end first timer here. 2002 WR250. What are the tricks or special tools to remove the cylinder nut under the power valve cover? The shaft coming out of the case is in the way and the nut is kind of buggered up.

    Thanks.
    Mike
    mkfox, Apr 8, 2014
    #1

  2. nonamerider Husqvarna
    AA Class

    Location:
    Oklahoma
    shave down awrench.when done use smaller nut re tap.
    nonamerider, Apr 8, 2014
    #2

  3. mkfox Husqvarna
    A Class

    Location:
    Michigan
    Husqvarna Motorcycle:
    2002 WR250
    Other Motorcycles:
    1973 Greeves Griffon
    Thank you. Shame to destroy the only 17mm wrench I have, but got it done.:thumbsup:
    mkfox, Apr 9, 2014
    #3