1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc top end rebuild needs?

Discussion in '2 Stroke' started by marshwater, Apr 3, 2013.

  1. marshwater Husqvarna
    A Class

    Location:
    WNC
    Husqvarna Motorcycle:
    '12 TE449 (sold) '13 WB165
    gonna go ahead and rebuild the top end on my 01 cr125 (125 cause i can't afford the 165 right now). reason being it's hard to crank (even with the lectron installed) and i don't know the last time it was rebuilt. what items do i need to order to achieve the top end rebuild? weisco piston kit, gasket kit, rod, bearing, ect?? just wanna make sure i got everything i need before breaking her down.
    marshwater, Apr 3, 2013
    #1

  2. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    the full weisco kit comes with everything you need. Base gasket, piston, ring, clips, rod bearing, head o-rings, etc.
    Motosportz, Apr 3, 2013
    #2
    Kreza likes this.

  3. marshwater Husqvarna
    A Class

    Location:
    WNC
    Husqvarna Motorcycle:
    '12 TE449 (sold) '13 WB165
    the full kit seems hard to locate?
    marshwater, Apr 3, 2013
    #3

  4. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    ohmygewd, Apr 3, 2013
    #4

  5. Kreza Husqvarna
    AA Class

    Location:
    Ballarat, Australia
    Husqvarna Motorcycle:
    2010 TE 450
    Other Motorcycles:
    1998 KX80 2013 TM85
    I searched this site and found your 01 125 http://www.wiseco.com/ProductSearch.aspx
    Make sure you have all the parts and drain the coolant prior, I haven't yet, but others have emptied the coolant into the crankcase on disassembly.

    just double checked myself and it was only the piston, sorry.
    Kreza, Apr 4, 2013
    #5

  6. marshwater Husqvarna
    A Class

    Location:
    WNC
    Husqvarna Motorcycle:
    '12 TE449 (sold) '13 WB165
    so since there is no full kit available is this all i need? Base gasket, piston, ring, clips, rod bearing, head o-rings?? also wondering if lean jetting would affect my bike cranking? like i said, lectron is installed and the plug is white (very little tan) how much turning to get rich enough?
    marshwater, Apr 4, 2013
    #6

  7. dirt-dude Husqvarna
    AA Class

    Location:
    Pa.
    Cometic gasket kit- C7734 Wiseco piston kit-760M05400 Wiseco wrist pin bearing-B1001 and if you have v-force 2 reeds pedal kit-3P602H, Also check the lower connecting rod bearing side to side with feeler gauge and check for any up and down play or roughness in the bearing.
    dirt-dude, Apr 4, 2013
    #7