All 2st torque specs...anyone!

I've searched all over our index and my memory stick manual and I can't find torque specs for 90% of all things on my '10 WR125. In english. I've tried that free download spec site and all it allows me to do is upload and there is NO grey download button. I need info on torque specs for rear shock, rocker arm, control arm etc.; entire linkage specs.

Can anyone assist? Deeply appreciated!

About thattttttttttttttt much. Ahhhhhhhhhha.

59 ft/lbs for the rocker arm to frame and swingarm(big bolts) and 35 for the smaller shock bolts...90 ft/lbs for the swingarm bolt....104 for the axle nut, but I think that is too much..... all this is based on prior year specs since they are non existent in 2011 manuals.

yah, I know exactly what you mean. Thanks Dwight!

That has been my biggest gripe with Husky - no friggin shop manuals for the '09 and above wr125.
Even the torque values I have found don't include common values for the rear axle nut, linkage, etc.

104 ft/lbs for the axle nut? I have only been setting mine at 65 ft/lbs (what my KX250 called for.)

I guess I torque to yz specs or just use Dwight's method! Thanks folks.

I have a pdf of the torque specs from an '08 WR125, around 8 pages.

I can't figure out how to attach a pdf into the reply...send me a pm.

Or tell me how to attach..or I could scan and insert but not sure how clear it would be.

It's been enough to get me by, if you can figure out what they are calling things.

I could send right after lunch...

Thanks pahusky! It's alright, I called rivercity in Kamloops b.c. and got all torque specs needed.