1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Trail Tech and older(01) WR250

Discussion in '2 Stroke' started by Huskys4Life, Jan 20, 2010.

  1. Huskys4Life Husqvarna
    B Class

    Location:
    Hemlock, Michigan
    Has anyone installed a trail tech speedo on their older wr. Mine is an 2001. I think the kit #100-20 for 00-09 ktms fits the older model Huskys (I will have to recheck with trail tech). I was just wondering what mods to the speed sensor you had to make to fit it on the front rim.
    Huskys4Life, Jan 20, 2010
    #1

  2. Vegas Husky Husqvarna
    AA Class

    Location:
    Las Vegas Nevada
    It has been awhile but I have a Trail Tech on all my bikes 92,96 and 99 and I think I used kit #400??? I wedged the pick-up sensor between the brake calliper and the calliper mount on the forks. As for the magnet, I replaced one of the rotor bolts with the included "magnet bolts". I will try to post pics when I get home from work. Hope this helps, Chris
    Vegas Husky, Jan 21, 2010
    #2

  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I believe you can drill and tap the caliper carrier and use the screw in type as well. Very solid that way.
    Motosportz, Jan 21, 2010
    #3

  4. Huskys4Life Husqvarna
    B Class

    Location:
    Hemlock, Michigan
    Thanks for the replies. Pics would be great
    Huskys4Life, Jan 21, 2010
    #4

  5. petrez Husqvarna

    Husqvarna Motorcycle:
    wr 250 2003
    I am also curious about this . Hava 2003 with a non working speedo (believe it or not) As mentioned the trail techs are for new models so can anyone recomend another speedo ...... or isit bicycle speedos for the older wrs lol !
    I have emailed trail tech about this and will post when i have a email from them.
    petrez, Apr 21, 2014
    #5